Using The Detail Tabs; Viewing Historical Information (History Tab) - D-Link DSN-1100 X Stack User Manual

5.2 Using the Detail Tabs

System Administration View provides the following Detail Tabs:
The History tab shows historical information. See section 5.2.1.

The Schedule tab shows tasks that have been scheduled. See section 5.2.2.

The Settings tab lets you:

Save the current xStack Storage configuration. See section 5.2.3.
–
Restore a previously saved configuration file. See section 5.2.4.
–
Restore factory default settings. See section 5.2.5
–
Upgrade software. See section 5.2.6.
–
Restart the xStack Storage. See section 5.2.7.
–
Shut down the xStack Storage. See section 5.2.8.
–
Specify a battery policy for the xStack Storage. See section 5.2.9.
–
Set up user accounts. See sections 5.2.10 and 2.3.
–
View and change advanced settings. See section 5.2.10.
–

5.2.1 Viewing Historical Information (History Tab)

The History tab in the System Administration View provides an historical list of
informational, warning, and error items (see Figure 5-2). Each row in the tab corresponds to
an item. The items are date- and time-stamped, with the most recent item appearing at the
top of the list. The time zone configured for the array appears in parentheses on the tab
label; in Figure 5-2, for example, the array is configured for Pacific Daylight Time (PDT). The
icon in the left column indicates the severity of the item. When you select an item, detailed
information about the item appears on the right side of the tab.
xStack Storage Management Center Software User's Guide 71