Table of Contents
Advertisement
Connect the DLB-1200 to Your Ethernet
A、Ensure the DLB-1200 and DSL/Cable Modem are power OFF.
B、WAN port connection
Please use a standard cable or the cable supplied with your DSL/Cable Modem to connect DLB-1200 and DSL/Cable
Modem. If using only one Broadband modem, connect it to the "WAN 1 External Port".
If your WAN (DSL/Cable Modem) has been connected to internal Firewall or Router, please connect the DLB-1200 to the
Firewall or Router.
C、Ethernet port connection
Use 10Base T and 100Base T connections to connect your admin PC with the internal Switch or Hub that connected to the
Ethernet Port on DLB-1200. If you want directly connect the DLB-1200 to this PC, you have to use a Cross Over Line as
connection.
B.
WAN Port
Please use a standard cable or the
cable supplied with your DSL/Cable
Modem to connect
Console Port
If you need to configure the admin password or user
name, please connect one PC to this port and
change above items with the terminal linking
applications of the PC.
to here.
C.
Ethernet Port
Please use 10Base T and 100Base T connections to
connect to here. Another end has to be connected to
internal Switch or Hub.
DC Power Inlet
Connect the supplied power
adapter here.
Advertisement
Table of Contents
