Using The Bluetooth® Devices; Registering A Bluetooth Device - JVC KD-AR390 Instructions Manual

[Turn]
!llt
4
Enter aPIN (Personal Identification Number)
(ode to the unit.
• You can enter any number you like (l-digit to
16-digit number). [Initial: 0000]
*
Some devices have their own PIN code. Enter the
specified PIN code to the unit.
OJ
Move to the next (or preVious) number
position.
W
Repeat steps
OJ
and
W
until you finish
entering aPIN code.
m
Confirm the entry.
~. ... "OPEN.." flashes on the display.
Mol ...
v
A
3
Select /lOPEN."
8"+@
2
Select /lNEW DEVICE."
Registering using IIOPEN"
Preparation: Operate the device to turn on its Bluetooth
function.
1
Select /lBT-PHONE/I or /lBT-AUDIO."
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with adevice.
• Select "BT-PHONE" or "BT-AUDIO" as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating
the unit.
Using the Bluetooth® devices
To use aBluetooth device through the unit
("BT-PHONE" and "BT-AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even ifyou reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at atime for each
source ("BT-PHONE" and "BT-AUDIO").
For Bluetooth operations, it is required to connect
the Bluetooth Adapter (KS-BTA200) (separately
purchased) to the CD changer jack on the rear of this
unit.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth GD
function.
10