Floppy Configuration - Supero X6DVL-EG2 User Manual

X6DVL-EG2 User's Manual
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help
predict impending drive failures. Select Auto to allow the BIOS to auto
detect hard disk drive support. Select Disabled to prevent the AMI BIOS
from using the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use
the S.M.A.R.T. to support hard drive disk.
Enabled, and Auto.
32Bit Data Transfer
Select Enabled
Disabled to deactivate the function. The options are Enabled and Dis-
abled.
Hard Disk Write Protect
Select Enabled to enable the function of Hard Disk Write Protect to prevent
data from being written to HDD. The options are Enabled or Disabled.
IDE Detect Time Out
This feature allows the user to set the time-out value for detecting ATA,
ATA PI devices installed in the system. The options are 0 (sec), 5, Mode
1.0, 15, 20, 25, 30, and 35.
! ! ! ! !

Floppy Configuration

This option allows the user to configure the settings for the Floppy Drives
installed in the system.
Floppy A
Move the cursor to these fields via up and down <arrow> keys to select
the floppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4",
720 KB 3½", 1.44 MB 3½", and 2.88 MB 3½".
OnBoard Floppy Controller
Select Enabled to enable the Onboard Floppy Controller. The options are
Disabled and Enabled.
to activate the function of 32-Bit data transfer. Select
4-8
The options are Disabled,