Special Features; Bios Recovery; Recovery From Ac Power Loss; Pc Health Monitoring - Supero X6DVL-EG2 User Manual

X6DVL-EG2 User's Manual
1-3

Special Features

BIOS Recovery

The BIOS Recovery function allows you to recover your BIOS image file if
the BIOS flashing procedure fails (see Section 3-3).

Recovery from AC Power Loss

BIOS provides a setting for you to determine how the system will respond
when AC power is lost and then restored to the system. You can choose
for the system to remain powered off (in which case you must hit the
power switch to turn it back on) or for it to automatically return to a power-
on state. See the Power Lost Control setting in the Advanced BIOS Setup
section (Peripheral Device Configuration) to change this setting.
fault setting is Always On.
1-4

PC Health Monitoring

This section describes the PC health monitoring features of the
X6DVL-EG2. All have an onboard System Hardware Monitor chip that sup-
ports PC health monitoring.
Onboard Voltage Monitors for the CPU Cores, Chipset
Voltage, Memory Voltage, +3.3V, +5V, +12V, -12V, +3.3V
Standby, and 5V Standby
An onboard voltage monitor will scan these voltages continuously. Once a
voltage becomes unstable, a warning is given or an error message is sent
to the screen if SuperDoctorIII is installed. Users can adjust the
thresholds in SuperDoctorIII.
Fan Status Monitor with Firmware/Software On/Off Control
The PC health monitor can check the RPM of the cooling fans. The onboard
4-pin CPU and chassis fans are controlled by thermal management though
BIOS settings.
1-10
The de-
voltage