Supero X6DVL-EG2 User Manual page 23

2. Insert the CPU in the socket,
making sure that pin 1 of the CPU
aligns with pin 1 of the socket
(both corners are marked with a
triangle). When using only one
CPU, install it into CPU socket #1
(Socket #2 is automatically disabled
if only one CPU is used).
3. Press the lever down until
you hear the *click* so you
can be sure that the CPU is
securely installed in the CPU
socket.
CEK Heatsink Installation
(*Caution: Heatsinks are heavy;
please handle with care.)
1. Do not apply any thermal grease to
the heatsink or the CPU die; the required
amount of thermal grease has already
been applied.
2. Place the heatsink on top of the
CPU so that the four mounting holes
are aligned with those on the retention
mechanism.
3. Screw in two diagonal screws (ie
the #1 and the #2 screws) until just
snug (-do not fully tighten the screws
to avoid possible damage to the CPU.)
4. Finish the installation by fully
tightening all four screws.
2-3
Chapter 2: Installation
Pin1
Socket lever in the
locking Position
CEK Heatsink
Screw#1
Screw#2
Screw#1
Screw#2