Supero X6DVL-EG2 User Manual page 11

Quick Reference (X6DVL-EG2)
Jumper Description
J13 SMB Data to PCI Enable
J15 SMB Clock to PCI Enable
JBT1 Clear CMOS
JPG1 Video Enable
JPL1/JPL2 LAN1/LAN2 Enable
JAR Alarm Reset
JWD Watch Dog Enable
Connector
ATX PWR (PW1)
CPU PWR (PWR2)
COM1(J4)/COM2 (J5)
DS1-2, DS4-5
DS7, DS8
DS9
DIMM#1A-#2B
FAN #1-#6
Floppy (J24)
FP Ctlr (JF1)
JLAN1/JLAN2
I-SATA 0/1 (JS0/JS1)
IDE1, IDE2
IPMI
JF2
JL1
JSLED
Keyboard/Mouse (J2)
LPT (J10)
PW3
PW4
PCI#1-3
PCI#6
PCIE#4,5
WOL(JWOL)
WOR (JWOR)
USB 0/1(J3)
USB 2/3 (J42)
V G A (J6)
Description
Primary 24-pin ATX PWR Connector
12V 8-pin CPU PWR Connector
COM1/COM2 Serial Port Connectors
Onboard LED Indicators (*See Chapter 2)
POST Code LED (*See Appendix A)
System LED Indicators (*See Chapter 2)
Memory (DIMM) Slots#(1A,1B, 2A,2B)
CPU/Chassis Fans Headers
Floppy Disk Drive Connector
Front Panel Control (* See Chapter 2)
G-bit Ethernet (GLAN1/GLAN2) Ports
Intel Hance Rapids-Serial ATA Ports 0/1
IDE #1/2 Hard Disk Drive Connectors
IPMI Socket (*Note below)
Speaker, PWR LED, Keylock (*See Chapter 2)
Chassis Intrusion Header
SATA LED Header
PS2 Keyboard/Mouse Ports
Parallel (Printer) Port
Power System Management
Power Fault Header
PCI 32-bit 33MHz slots
PCI 64-bit 66MHz slot
PCI-Express x4 (w/x8 width) slots
Wake-on-LAN
Wake-on-Ring Header
Back Panel Universal Serial Bus Ports
Front Panel Universal Serial Bus Ports (*Note)
Video Graphics Connector
1-5
Chapter 1: Introduction
Default Setting
Open (Disabled)
Open (Disabled)
See Chapter 2
Closed (Enabled)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Reset)