Table of Contents
Advertisement
64LHP5000
PROJECTOR UNIT
Remote Control Unit Functions
1
5
3
7
4
q
MONITOR (TV) CONTROL BUTTONS
1 POWER button
Turns the power of the Rear Projection HDTV on and off.
2 Input button (TV, DTV, INPUT 1 to INPUT 4)
Press the button to select the source you wish to watch. The screen
0
will display your selection.
9
3 VIEW MODE button
Press to select the VIEW MODE.
4 ANT-A/B button
8
Press to switch between ANTENNA-A and ANTENNA-B when you
wish to watch TV.
5 Direct channel selection buttons
Press the button (or buttons) that corresponds to the channel that
6
you wish to watch.
6 CH (channel) ', " button
Press plus ' or minus " to tune in a higher or lower channel. Only
the preset channels can be tuned in using these buttons.
7 MUTE button
Press to temporarily turn off the sound. Press again to return to the
previous volume level.
8 Cursor/ENTER buttons (ENTER, \, |, ', ")
\, |, ', ": Press to select or adjust items on the menu screen.
ENTER:
Press to activate the selected function.
2
9 FAVORITES buttons
These buttons call up the channels that have been assigned to
them.
REMOTE CONTROL UNIT SETTING BUTTONS
0 Remote control mode select buttons
Use to switch the remote control unit modes.
q Light button
When this button is pressed, some buttons on the remote control
unit will light. The lighting will turn off if no operations are performed
within about six seconds.
This button is used for performing operations in dark places.
8
Advertisement
Table of Contents
