Table of Contents
Advertisement
Press to stop recording.
.
ANNC
"Announcement.
Press PLAY or press
RECORD."
2.
PLAY/STOP
(Plays announce-
ment previously
recorded).
- OR -
.
ANNC
"Announcement.
Press PLAY or press
RECORD."
2.
RECORD
"Record after the
tone. Press STOP
when you are
done."
3.
Speak into microphone.
Microphone
4.
PLAY
(Announcement
is played back).
5.
ANNC
to exit announcement record-
ing.
Answering system operation
Outgoing announcements
Elapsed
recording
The outgoing announcement is the message callers
time (sec-
hear when calls are answered by the answering system.
onds).
The telephone is factory set with an announcement.
If the telephone is set up to record messages, it
answers calls with "Hello. Please leave a message
after the tone." You can use this announcement, or
replace it with a recording of your own voice.
To play your outgoing announcement
Press ANNC
Press PLAY or press RECORD." Press
You will hear the outgoing announcement.
To record your outgoing announcement
Press ANNC, then you will hear "Announcement.
Press PLAY or press RECORD." Press RECORD
and begin speaking after you hear "Record after
the tone. Press STOP when you are done."
Speak facing the telephone base from about
nine inches away. Press
are done. Your recorded announcement will be
played back.
Elapsed time (in seconds) will be shown in
the message window when recording. You can
record an announcement up to 90 seconds long.
Announcements shorter than three seconds long
will not be recorded.
To delete your outgoing announcement
Press ANNC, then you will hear "Announcement.
Press PLAY or press RECORD." Press
to begin playback. Press
/STOP
delete your announcement.
When your announcement is deleted, calls will
be answered with the factory set announcement
described above.
NOTE: Press ANNC to exit the announcement menu.
then you will hear "Announcement.
,
36
PLAY/
when you
/STOP
PLAY
PLAY/
during playback to
DELETE
.
STOP
STOP
Advertisement
Table of Contents
