Related Manuals for JBL Control 12C-VA
Summary of Contents for JBL Control 12C-VA
-
Page 1: Installation Guide
Control 10C-VA Series Ceiling Loudspeakers Control 12C-VA, Control 14C-VA, and Control 16C-VA Owner’s Manual & Installation Guide Rev A... -
Page 2: Table Of Contents
EN54-24 certified ceiling loudspeakers utilize innovative design and materials to provide premium level performance from compact in-ceiling speakers. CONTROL 12C-VA – A 3” (75 mm) full-range driver to provide high-fidelity full-range sound over an extremely wide coverage area. Rotating CONTROL 14C-VA –... -
Page 3: Installation Preparations
Control 16C-VA MTC-26NC MTC-26MR (typically gypsum board) ceiling, JBL’s optional pre-installation brackets can be installed before the sheetrock is installed. The pre-installation bracket provides a bracket to which wiring can be tied behind the sheetrock. It can function as a cutout tem-... - Page 4 Additional Suspended Ceiling Installation Information Step 1 – Cut the Hole in the Ceiling Material. Cut- Tile Rails: The tile rails are designed to fit either standard out the circular hole to the cutout hole size listed above. Pull 24-inch wide tiles or 600-mm wide tiles. The tile rail piec- the wiring through the cutout hole.
- Page 5 Make sure the gland nut fitting is affixed and tightened in the proper knock-out location (add a second gland nut to the other knock-out location if two glands nuts are desired). Slide the wire through the gland nut (do not tighten the gland nut onto the wire yet).
- Page 6 Step 6 – Insert Speaker into Ceiling & Tighten– Step 5 – Re-attach Terminal Cover Plate and sert the speaker into the ceiling as far as it goes, until the front Tighten Gland Nut Slide the wire through the gland nut baffle rim touches the ceiling.
-
Page 7: Painting The Speaker
Painting the Speaker A tab is provided on the back of each speaker for connection to an independent secondary support point. Some construc- tion codes require using this secondary support point, which For EN54 Applications -- Painting is not allowed for EN54 requires connecting a support line to a separate secure support applications, under the general requirements for EN54-certified point on the building structure. -
Page 8: Safety Agency Compliance
3. Listed UL1480-6 Speakers for Fire Protective Signaling Systems. SUITABLE FOR USE IN AIR HANDLING SPACES. Warranty & Contacting JBL The C-VA models -- Control 12C-VA, Control 14C-VA and Con- trol 16C-VA are certified per EN54-24 These products are designed and backed by JBL Professional, the world leader in sound reinforcement. -
Page 9: Product Specifications
See product specification sheets for complete specification listings. Contribution of Each One-Third Octave Frequency Band when Speaker is Driven Control 12C-VA at Full Volume, measured at 4 meter dis- Components: 76 mm (3 in) full-range driver tance (req’ d in this manual by EN54-24)