Table of Contents
Advertisement
11 Service Position
11.1. Checking & Repairing Panel
P.C.B.
Step 1 Remove the top cabinet.
Step 2 Remove the DVD lid.
Step 3 Disassemble the front panel.
Step 4 Disassemble Panel P.C.B.
Step 5 Disassemble Volume P.C.B.
Step 6 Disassemble Mic P.C.B.
Step 7 Disassemble USB P.C.B.
Step 8 Connect FFC cable at the connectors (CN2005,
CN2006 & CN2007) on Main P.C.B. and (CN8000) on USB
P.C.B.
Step 9 Turn over Panel P.C.B. horizontally and place it
according to the diagram shown below.
11.2. Checking & Repairing Mic
P.C.B.
• • • • Follow (Step 1) to (Step 8) of Item 11.1.
Step 1 Turn over Mic P.C.B. horizontally and place it according
to the diagram shown below.
SA-PT160GC / SA-PT160GCP / SA-PT160GCS / SA-PT160GCT / SA-PT160GS
11.3. Checking & Repairing Main
P.C.B.
Step 1 Remove the top cabinet.
Step 2 Remove the DVD lid.
Step 3 Disassemble the front panel.
Step 4 Disassemble Panel P.C.B.
Step 5 Disassemble Volume P.C.B.
Step 6 Disassemble Mic P.C.B.
Step 7 Disassemble USB P.C.B.
Step 8 Disassemble the DVD mechanism unit.
Step 9 Disassemble USB Relay P.C.B.
Step 10 Disassemble the rear panel.
Step 11 Disassemble Main P.C.B. & Tuner Extent P.C.B.
Step 12 Disassemble SMPS Module P.C.B.
Step 13 Position Panel P.C.B., Volume P.C.B., Mic P.C.B.,
USB P.C.B., DVD mechanism unit, USB Relay P.C.B., SMPS
Module P.C.B., Main P.C.B. & Tuner Extent P.C.B. according
to diagram shown below.
Step 14 Connect FFC cable at the connectors (CN2001,
CN2005, CN2006, CN2007 & CN5704) on Main P.C.B.,
(CS901) on Tray Loading P.C.B., (CN2 & CN3) on SMPS
Module P.C.B., (CN8000) on USB P.C.B. and (CN8003) on
USB Relay P.C.B.
51
Advertisement
Table of Contents
