Unlocking Channel Control; Locking Channel Control To Cbl; Changing Volume Lock - Universal Electronics atlas ocap 5-device User Manual

Unlocking Channel Control

On the remote control, press CBL once; it will
1.
blink once. Press and hold SETUP until the
CBL key blinks twice.
2. Enter 9 7 3. The CBL key will blink twice.
3. Press CH- once. The CBL key will blink four
times.
Now the remote control will provide TV and VCR
channel-control capabilities while in the TV or VCR
mode.

Locking Channel Control to CBL

On the remote control, press CBL once; it will
1.
blink once. Press and hold SETUP until the
CBL key blinks twice.
2. Enter 9 7 3.The CBL key will blink twice.
Press CH+ once. The CBL key will blink twice.
3.
Now, regardless of what mode you select (except AUD),
the channel keys will only change channels on your cable
converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Atlas
OCAP 5-Device Remote Control, Global Volume Lock is
set to TV, so you can control TV volume while in the VCR,
DVD, TV or CBL mode. You can perform Individual
Volume Unlock on a selected device to set its volume
control for independent operation.
www.urcsupport.com/atlasocap
15