Jumpers; Clear Cmos Jumper: Jbat1; Bios Flash Jumper: Bios_Wp1; Jumper - MSI MS-7082 Manual

MS-7082 Micro ATX Mainboard
The motherboard provides the following jumpers for you to set the computer's function.
This section will explain how to change your motherboard's function through the use of

jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external battery to keep
the data of system configuration. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration, use
the JBAT1 (Clear CMOS Jumper ) to clear data. Follow the instructions below to clear
the data:
JBAT1
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then
return to 1-2 pin position. Avoid clearing the CMOS while the system
is on; it will damage the mainboard.

BIOS Flash Jumper: BIOS_WP1

This jumper is used to lock or unlock the boot block area on BIOS. When
unlocked, the BIOS boot block area can be updated. When locked, the BIOS boot block
area cannot be updated.
2-24
Jumpers
3
1
1
Keep Data
BIOS_WP1
BIOS Flash Locked BIOS Flash Unlocked
3
1
Clear Data