Table of Contents
Advertisement
" "
Maintenance Manual
1. Remove the controller board assembly. (See page 36).
2. Remove the keypad assembly (4) from the inner housing (5) by pushing the keypad up
though the hole in the inner housing.
3. To remove the cover, open the button subminiature switch (2). Unplug the black single
harness wire and the white wire of the switch wire harness from the tabs on the switch.
Unscrew the screw (1) holding the switch to the inner housing (5).
4. To remove the knife subminiature switch (3), unplug the blue and red wires of the switch
wire harness from the tabs on the switch. Unscrew the screw (6) holding the switch to the
inner housing (5).
5. To remove the cover interlock switch/flat lever assembly (7), unplug the black single
harness wire and the black wire of the switch wire harness from the tabs on the switch.
Unscrew the screw (8) holding the switch to the inner housing (5).
Advertisement
Table of Contents
