Table of Contents
Advertisement
7(67,1*7+(35,17(5
You can test the printer to ensure that it is running properly. The sample on the following
page shows what a printout of the test may look like. The test pattern varies depending on the
printer model and the character set selected when the printer was ordered.
Note:
Run the test after loading the paper, but before connecting the printer to
a host system. If the characters do not print properly, check to make
sure the paper is installed correctly.
If the printer is still not working correctly, contact your dealer.
1. Plug the DC power cord from the external power supply into the printer.
2. Plug the AC power cord into the external power supply.
3. Plug the AC power cord into a grounded three-prong power socket.
4. The status LED will start flashing after approximately 1½ seconds.
5. Open the printer cover.
6. Feed a roll of paper into the printer, leave some paper sticking out and close the paper
cover.
7. The printer will print some technical information.
8. To print sample code pages, press the FEED button.
Testing the Printer
Advertisement
Table of Contents
