Table of Contents
Advertisement
Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto
to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4.
Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to
Auto. You may have to install the UltraDMA driver supplied with this motherboard in order
to use an UltraDMA device.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the drive
can support and improves the speed of access to IDE devices.
Press <Esc> to return to the Integrated Peripherals screen.
%VIA OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
AC97 Audio
MC97 Modem
OnChip USB Controller
USB 2.0 Support
USB Legacy Support
USB Mouse Support
&'()
: Move
F5:Previous Values
AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this item if you are going to install a
PCI audio add-in card.
MC97 Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going to install an
external modem.
OnChip USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this mainboard.
USB 2.0 Support (Enabled)
Enable this item if want to use the USB 2.0.
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Enter: Select
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Using BIOS
Item Help
%
%
Menu Level
F7:Optimized Defaults
35
Advertisement
Table of Contents
