Remote Control Battery; Connection Diagram - Monoprice 13259 User Manual

REMOTE CONTROL BATTERY

The included remote control ships with a CR2025 Lithium battery pre-installed in the
battery compartment. A plastic film is used to prevent contact, so that the battery is not
drained during storage and shipping.
Prior to first use, grasp the plastic tab protruding from the battery compartment and pull
it out to remove the protective film, allowing the remote control to operate.
When the remaining battery capacity is low, the remote control becomes unresponsive
or responds intermittently. Perform the following steps to replace the battery:
1. Pull the battery compartment cover to remove it.
2. Replace the existing CR2025 battery with a new one. Pay close attention to the
polarity markings to ensure that it is inserted properly.
3. Push the battery compartment cover to close it.

CONNECTION DIAGRAM

The following diagram illustrates a typical configuration.
Notes:
 The AUX 1 input is a low sensitivity input intended for use with devices with a
2000mV maximum signal strength, such as a CD or DVD player.
 The AUX 2 input is a high sensitivity input intended for use with devices with an
800mV maximum signal strength, such as the headphone output of a mobile
phone or television set.
7