Monoprice 13259 User Manual page 5

Speakers (Rear)
7. Slave (Right) Speaker Input: Plug the
included slave speaker cable into this
input on the slave (right) speaker.
8. STANDBY (Power) Button: Press this
button to power the system ON or OFF.
9. AUX-IN 1 Left/Right RCA Input Jacks
(strong signal): Connect a line level
audio source device to these RCA inputs
using the included stereo RCA cable. This
is a low sensitivity input and is intended
for use with modern audio equipment with
2000mV maximum signal strength, such
as CD players and DVD players.
10. AUX-IN 2 Left/Right RCA Input Jacks
(weak signal): Connect a line level audio
source device to these RCA inputs using
the included stereo RCA cable. This is a
high sensitivity input and is intended for
use with devices with an 800mV
maximum signal strength, such as the
headphone output of a mobile phone or
television set.
11. USB PC Input: Use the included USB 2.0 cable to connect to a computer to
use the speakers as a USB audio device.
12. DC 24V Power Input Jack: Plug the included AC adapter into this power jack.
13. Slave (Right) Speaker Output: Plug the included slave speaker cable into this
output on the main (left) speaker.
14. RESET Button: The Reset button is recessed below the surface of the panel, so
that it cannot be accidentally activated. Use a paper clip, toothpick, or other
small, blunt object to press the recessed button. If the system "locks up" or is
otherwise unresponsive, press the Reset button to restore it to the factory default
settings.
Remote Control
1. Infrared Transmitter: Aim the included infrared remote control at the main (left)
speaker.
2. MUTE Button: Press the Mute button to toggle the mute function on/off.
3. Play/Pause (
pause or resume playback.
) Button: When using the Bluetooth input, press this button to
5