Battery Status; Connecting To A Computer - Monoprice 35521 User Manual

Wireless omnidirectional usb conference room mic and speaker

Table of Contents

Volume Down

Volume Up

BATTERY STATUS

Momentarily press the Power button to display the remaining battery life, as shown in the

following chart.

1. Remove the cover from the USB plug on the included USB Wireless Dongle, then

plug the dongle into an available USB port on your computer. The computer should

automatically install the device and configure itself to use the speakerphone.

2. Press and hold the Power button on the speakerphone for about 3 seconds to

power it on. Wait for it to establish a connection with the computer. While the

Momentarily press the button to decrease the volume.

The LEDs will momentarily illuminate blue to show the

volume level. When the minimum volume level is reached,

the first LED will flash blue.

Momentarily press the button to increase the volume. The

LEDs will momentarily illuminate blue to show the volume

level.

Table of Contents