Monoprice 13259 User Manual page 6

Bluetooth bookshelf speakers with usb
Table of Contents

Advertisement

4. Previous (
) and Next (
using the Bluetooth input, press the
skip back to the beginning of the current track. If
already at the beginning of the track, press
skip back to the beginning of the previous track.
Press the
button to skip forward to the beginning
of the next track.
5. TRE+ and TRE- Buttons: Use these buttons to
adjust the high frequency response. Press the TRE+
button to increase the high frequency response and
the TRE- button to decrease the high frequency
response. The high frequency response can be
adjusted up to ±6dB.
6. AUX 2 Button: Press the AUX 2 button to select the
AUX 2 input. Due to the different sensitivities of the
various inputs, the volume should be decreased to
minimum or the mute function toggled on before
switching inputs. The status LED glows yellow.
7. BT Button: Press the BT button to select the Bluetooth radio input. Due to the
different sensitivities of the various inputs, the volume should be decreased to
minimum or the mute function toggled on before switching inputs. The status
LED glows blue.
8. STANDBY Button: Press the Standby button to power the system ON or OFF.
9. VOL+ and VOL- Buttons: Use these buttons to adjust the output volume level of
the speaker system.
10. BASS+ and BASS- Buttons: Use these buttons to adjust the low frequency
response. Press the BASS+ button to increase the low frequency response and
the BASS- button to decrease the low frequency response. The low frequency
response can be adjusted up to ±6dB.
11. AUX 1 Button: Press the AUX 1 button to select the AUX 1 input. Due to the
different sensitivities of the various inputs, the volume should be decreased to
minimum or the mute function toggled on before switching inputs. The status
LED glows magenta.
12. PC Button: Press the PC button to select the USB input. Due to the different
sensitivities of the various inputs, the volume should be decreased to minimum or
the mute function toggled on before switching inputs. The status LED glows
green.
13. NORMAL Button: Press the Normal button to reset any adjustments made to
the bass and treble (low and high frequency response) settings.
14. Battery Compartment (underside): The battery compartment is on the
underside at the base of the remote control.
) Buttons: When
button to
to
6

Advertisement

Table of Contents
loading

Table of Contents