Domesheet Exchange Instruction - Nokia E70 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
0.

DOMESHEET EXCHANGE INSTRUCTION

1. Place the new ENGINE QWERTY DOMESHEET on the SS-70.
Align it with the two guide pins and remove the protection
foil.
3. Place the new FLIP QWERTY DOMESHEET on the SS-70. Align
it with the four guide pins and remove the protection foil.
5. Place the new T9 DOMESHEET on the SS-70. Align it with the
three guide pins and remove the protection foil.
Service Manual E70 RM-0 / RM-24
Page 8 (20)
CONFIDENTIAL
2. Place the 1EM ENGINE MODULE over the SS-70 and align it with
the two guide pins. Now press the module on the domesheet
and remove the assembly.
4. Place the FLIP PWB over the SS-70 and align it with the four
guide pins. Now press the FLIP PWB on the domesheet and
remove the assembly.
6. Place the FLIP PWB over the SS-70 and align it with the three
guide pins. Now press the FLIP PWB on the domesheet and
remove the assembly.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
28.Apr.2006