Choosing A Place For The Printer - Epson FX-880 User Manual

Choosing a Place for the Printer

Follow the guidelines below when selecting a location for your
printer.
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
Place the printer where you can easily connect it to a
network interface cable, if necessary.
Leave adequate room around the printer for easy operation
and maintenance.
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, heat sources, or excessive
moisture or dust.
Avoid places subject to shocks and vibrations.
Place the printer near a wall outlet where you can easily
unplug the power cord.
Note for French-speaking users:
Placez l'imprimante près d'une prise de contact où la fiche peut
être débranchée facilement.
Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer.
Also avoid outlets on the same circuit as large motors or
other appliances that can cause voltage fluctuations.
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Use a grounded power outlet; do not use an adapter plug.
Make sure the paper path is clear and unobstructed before
you print on continuous paper. (See the next page.)
Setting Up the Printer
1
1-3