Epson FX-880 User Manual page 79

10. If you are loading paper into the front slot, attach the front
cover with the continuous paper positioned as shown below.
11. Turn on the printer.
12. Remove any slack in the paper, and adjust the top-of-form
position (the position where you want printing to start) using
the micro adjust feature. The printer will start printing at the
current position without advancing the paper. To use the
micro adjust feature and change the top-of-form position, see
"Adjusting the Top-of-Form Position" on page 3-30.
c
Caution:
Never use the knob to adjust the top-of-form position;
this may damage the printer or cause it to lose the
top-of-form position.
Always remove any slack from the paper; otherwise
print quality may decline.
13. Attach the printer cover.
Printing on Continuous Paper
3
3-25