Epson FX-880 User Manual page 62

2. Set the paper release lever to the front push tractor position.
3. Release the left and right sprockets by pushing the sprocket lock
levers backward.
4. Slide the left sprocket approximately 12 mm (0.5 inches) from
the far left position and pull the lever forward to lock it in
place. Then slide the right sprocket to match the width of your
paper, but do not lock it. Move the paper support midway
between the two sprocket units.
3-8
Printing on Continuous Paper
12 mm (0.5 inches)
The triangle mark on the inside
the front cover indicates the
point furthest to the left from
which printing can begin.