Installing The Roll Paper Holder - Epson FX-880 User Manual

Installing the roll paper holder

1. Make sure the printer is turned off.
2. Remove the paper guide, then remove the tractor if it is installed
in the pull or rear push position. Reinstall the paper tension
unit if necessary.
3. Position the roll paper holder underneath the printer as shown
below. Fit the two positioning pegs on the bottom of the
printer into the two holes in the base plate.
c
Caution:
The roll paper holder is not fastened to the printer; only the
printer's weight and the two positioning pegs hold the roll
paper holder in place. If you pick up the printer, be careful
not to drop the roll paper holder.
3-38
Printing on Continuous Paper
roll paper
holder