Linking The Reader; Link Datalogic Rf Devices To Base; Power Off; Programming - Datalogic QuickScan QM21X1 Quick Reference Manual

Linking the Reader

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is necessary
to link the handheld with the base.
To link the handheld and the base, either press the trigger to
wake it, or simply mount into the base to wake up for opera-
tion. If the reader was previously linked to another base, you
Unlink
must first scan the bar code before re-linking to the
new base.
Unlink

Power Off

Scan the bar code below to shut off power to the handheld
until the next trigger pull.
PowerOff

Programming

The reader is factory-configured with a set of standard
default features. After scanning the interface bar code from
the Interfaces section, select other options and customize
your reader through use of the programming bar codes avail-
able in the Product Reference Guide (PRG). Check the corre-
sponding features section for your interface, and also the
Data Editing and Symbologies chapters.
The reader can also be configured with Datalogic Aladdin™
software (available on the Datalogic website). Aladdin pro-
vides RS-232 interface configuration, as well as bar code
printing.
10 QuickScan™ QM21X1