Datalogic QuickScan QM21X1 Quick Reference Manual page 13

Figure 3. Connecting the Base Station
Host Connection —
cable type is compatible with your host equipment.
Most connections plug directly into the host device as shown
in Figure 4. Keyboard Wedge interface cables have a 'Y' con-
nection where its female end mates with the male end of the
cable from the keyboard and the remaining end at the key-
board port on the terminal/PC.
Figure 4. Connecting to the Host
Power Connection —
socket. If plugged into the wall, ensure cable is facing down-
wards (as shown in
socket.
Quick Reference Guide
I/F Cable
DC Power
Cord
Base
Station
Verify before connection that the reader's
or...
Plug the AC Adapter into an approved AC
Figure 3) to prevent undue strain on the
Connecting the Base Station
Wall plug
Connector
AC/DC
Adapter
5