ECS P4VXASD2 User Manual page 15

PANEL2
This panel connector provides a set of switch and LED connectors found on
ATX case. Refer to the table below for information.
Pin Signal Name Pin
1 HDD 2
3 HDD 4
5 RESET 6
7 RESET 8
9 NC 10
J16: LAN LED Indicator
This connector is attached to LAN device that needs a LED indicator.
Device Pins
Link LED 1, +2
ACT LED +3, 4
Note: The plus sign (+) indicates a pin which must be connected to a positive
voltage.
Empty
Signal Name
(Pin 10)
SPD-LED
SPD-LED
Power Switch
(Pins 6, 8)
POWER ON/OFF
POWER ON/OFF
EMPTY
SPD- LED
(Pins 2, 4)
1
+
+
4
11
10 9
N/C
(Pin 9)
Reset Switch
(Pins 5, 7)
HDD LED
(Pins 1, 3)
2 1
LINK LED
ACT LED