Mitsubishi Electric CM33-TL User Manual page 9

USB Ports
The system board supports 2 USB ports. Two onboard USB ports are located
at the ATX double deck ports of the board. USB allow data exchange between
your computer and a wide range of simultaneously accessible external Plug
and Play peripherals.
BIOS
Desktop Management Interface (DMI)
The system board comes with a DMI 2.0 built into the BIOS. The DMI utility in
the BIOS automatically records various information about your system con-
figuration and stores this information in the DMI pool, which is a part of the
system board's Plug and Play BIOS. DMI, along with the appropriately net-
worked software, is designed to make inventory, maintenance and trouble-
shooting of computer systems easier. Refer to Chapter 4 for instructions on
using the DMI utility.
System Health Monitor Functions
The system board is capable of monitoring the following "system health" con-
ditions.
Refer to the "PC Health Status" section in chapter 3 and the "VIA Hardware
Monitor" section in chapter 4 for more information.
Automatic CPU/Chassis Fan Off
The CPU and chassis fans will automatically turn off once the system enters
the Suspend mode.
MAN-0CM33-001
•
Bus mastering reduces CPU utilization during disk transfer
•
Supports ATAPI CD-ROM, LS-120 and ZIP
•
Award BIOS, Windows
compatible
•
Flash EPROM for easy BIOS updates
•
Supports DMI 2.0 function
•
2 Mbit flash memory
•
Monitor CPU/system temperature and overheat alarm
•
Monitors VCORE/3.3V/5V/12V/2.5V voltages and failure alarm
•
Monitors CPU/chassis fan speed and failure alarm
•
Automatic CPU and chassis fans on/off control
•
Read back capability that displays temperature, voltage and fan
speed
MC Series Computer Products
INTRODUCTION
® 95/98/2000/ME/XP Plug and Play
1
5