Mitsubishi Electric CM33-TL User Manual page 27

System
Setup
OS Select for DRAM > 64MB
This field allows you to access the memory that is over 64MB in OS/2. The
options are Non-OS2 and OS2.
HDD S.M.A.R.T. Capability
The system board supports SMART (Self-Monitoring, Analysis and Reporting
Technology) hard drives. SMART is a reliability prediction technology for ATA/
IDE and SCSI drives. The drive will provide sufficient notice to the system or
user to back up data prior to the drive's failure. The default is Disabled. If you
are using hard drives that support SMART, set this field to Enabled. SMART is
supported in ATA/33 or later hard drives.
Small Logo (EPA) Show
Enabled
Disabled
Onboard LAN Boot ROM
By default, this field is disabled. Enable this field if you wish to use the boot
ROM (instead of a disk drive) to boot-up the system and access the local area
network directly.
If you wish to change the boot ROM's settings, type the <Shift> and <F10>
keys simultaneously when prompted during boot-up. Please note: you will be
able to access the boot ROM's program (by typing <Shift> + <F10>) only when
this field is enabled.
MAN-0CM33-001
3 AWARD BIOS SETUP UTILITY
The system will not boot and access to Setup will be denied
unless the correct password is entered at the prompt.
The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.
The EPA logo will appear during system boot-up
The EPA logo will not appear during system boot-up.
MC Series Computer Products
23