Mitsubishi Electric CM33-TL User Manual page 41

Mc series
Table of Contents

Advertisement

3 AWARD BIOS SETUP UTILITY
Load Optimized Defaults
This option loads optimal settings from the BIOS ROM. Use the default values
as standard values for your system. Highlight this option in the main menu and
press <Enter>. The message below will appear.
Load Optimized Defaults (Y/N)? N
Type <Y> and press <Enter> to load the Setup default values.
Set Supervisor Password
If you want to protect your system and setup from unauthorized entry, set a
supervisor's password with the "System" option selected in the Advanced BIOS
Features. If you want to protect access to setup only, but not your system, set
a supervisor's password with the "Setup" option selected in the Advanced BIOS
Features. You will not be prompted for a password when you cold boot the
system. Use the arrow keys to highlight "Set Supervisor Password" and press
<Enter>. The message below will appear:
Enter Password
Type in the password. You are limited to eight characters. (ALWAYS KEEP A
RECORD OF PASSWORDS IN A SAFE PLACE!) When done, the following
message will appear:
Confirm Password
You are asked to verify the password. Type in exactly the same password. If
you type in a wrong password, you will be prompted to enter the correct pass-
word again. To delete or disable the password function, highlight "Set Super-
visor Password" and press <Enter>, instead of typing in a new password. Press
the <Esc> key to return to the main menu.
Set User Password
If you want another user to have access only to your system but not to setup,
set a user's password with the "System" option selected in the Advanced BIOS
Features. If you want a user to enter a password when trying to access setup,
set a user's password with the "Setup" option selected in the Advanced BIOS
Features.
Using user's password to enter Setup allows a user to access only "Set User
Password" that appears in the main menu screen. Access to all other options
is denied. To set, confirm, verify, disable or delete a user's password, follow
the procedures described in the section "Set Supervisor Password".
37
MAN-0CM33-001
MC Series Computer Products

Advertisement

Table of Contents
loading

Table of Contents