Haier HWM65-1128NZP User Manual page 8

How to change the direction of the drain hose
Remarks: In order to make sure of the correct of installation, it is suggested to change
the direction of the drain hose with our company serviceman.
HWM65-1128NZP
1.Dismantle the back cover of the washing machine.
2.Press the spring lamination lightly and pull the top
segment of the drain hose decumbent then put
down the drain hose from the drain hose frame.
3.Put down the drain hose, squeeze the drain hose
lightly and take off the hook, put the drain hose into
the cabinet. Take off the small baffle which installed
on the other drain outlet and install it on the side
which won't install the drain hose.
4.Extend the drain hose from the other side and install
it on the base by the drain hose frame
5.Install the back cover.
HWM75-1128NZP
1. Please lean the washing maching gently down on soft items,such as towel, cloth,
blanket, etc.(as indicated in Figure 1)
2. Dismantle the bottom plate.(as indicated in Figure 2)
3. Nip the end of the drain hose and remove the hook of ¿xing the drain hose.(as
indicated in Figure 3)
4. Put your hand into the washing machine and undraw the drain hose clamp. Extend the
drain hose in other side and ¿x it with the clamp. (as indicated in Figure 4)
5. Install the bottom plate and the hook of ¿xing the drain hose.
Figure 1
8
Figure 2
Back cover
Drain hose frame
Take off the
drain pipe clip
Figure 3
Spring lamination
Figure 4