Haier HWM65-1128NZP User Manual page 14

D "Soak" "Wash","Rinse","Spin" button
Press the "Soak","Wash" "Rinse","Spin" button to select the desired soak time,wash time,
rinse times and spin time from the Normal,Strong,Delicate,Memory and Standard programs.
Press "Wash" "Rinse","Spin" button can change the process, can not change wash time,
rinse times and spin time from the Wool and Silk programs. Press "Soak" button, can not
change time and the process.
Press "Wash" ,"Rinse","Spin" button can not change the progess, can not change wash time,
rinse times and spin time from "Quick Wash" program. Press "Soak" button, the machine
has no reaction.
During rinsing times setting, it could be selected whether overflow rinsing is required or not
according to actual demand. If overflow rinsing is set, water is continued to fill into the washing
machine after setting level is reached, until it is overflow, then foam in barrel will spill out of
spillway port, so as to prevent foam and dirt floating on surface pollute laundry again (note:
if low level or pressure is selected, and it may not reach overflow level, then overflow rinsing
will transfer to storage rinsing.)
E "Water Level" button
During Normal,Memory and Standard programs with washing process.
can detect the laundries automatically. After detection, it will set the water level to suitable
value among 35L, 46L, 54L (46L, 60L, 70L for HWM75-1128NZP) automatically.
Water level could also be determined by user, but it couldn't automatically again after this
machine started.
If there's water inside the tub, the machine cannot detect the laundries and will display water
level 35L(46L for HWM75-1128NZP). If wet laundries are put in, it may display water level
54L(70L for HWM75-1128NZP). You must set suitable water level by yourself.
During operation of Wash and Rinse programs, you can push down the Water Level button
to add water. When you release the button, or it reaches the overÀow water level, the
machine will stop adding water.
The water level decided may be different from actual value because of the different
moisture level of the laundries.
The rinse water value will be one level higher than the wash water value.(Except the highest
water level and when the rinse water level is selected by yourself).
F "Tub Self-clean" button
Press "Tub Self-clean" button to clean inner and outer tub.
Tub Self-clean program operates about 12 hours, it includes soak, wash, rinse and spin
process(soak lasts about 10 hours).Don't turn off power when the program operates,and
can not use it once again.
Do not put laundry and other things into tub.
It can get good effect with detegent for washing tub.
G "Air Dry" button
Press "Air Dry" button to set drying time (in minute), including
This product could dry 1.5kg synthetic clothes in once at most (clothes suits to iron after dry).
Dry degree will be varied with different clothing. Clothes shall be loosing before drying.
The dry mode couldn't be selected for program of "Wool" and "Silk".
14
You shall push the "Start/Pause " button to make new setting.
The washing machine
30,60 and 90 min in turn.