Connecting Other Peripheral Devices; Connecting Monitor Equipment; Connecting Headphones - Roland R-1000 Owner's Manual

48-track recorder/player

Hide thumbs Also See for R-1000:

Table of Contents

Connecting External Equipment

Connecting Other Peripheral Devices

This unit is equipped with balanced-type (XLR/TRS) connectors, which are wired as shown below. Check the wiring of the device you want to

connect and make the connection.

fig.XLR-TRS_jack.eps

Connecting Monitor Speakers

Connect monitor speakers to the MONITOR OUT connectors.

* The same mono audio is output from the [1] and [2] connectors.

* The nominal output level at the MONITOR OUT connectors is fixed at +4 dBu. It is recommended to connect monitors with accessible volume

control. So the volume can be easily adjusted.

fig.connect-monitor.eps

Connect headphones to the PHONES connector. You can use the [LEVEL] to adjust the volume level of the headphones.

* Output to the headphone (L/R) is mono audio x 2.

fig.connect-phone.eps

Table of Contents