Solving Problems; Product Status Messages - Epson SureColor F6200 User Manual

Solving Problems

Check these sections for solutions to problems you may have using your product.

Product Status Messages

Solving Printer Problems
Solving Printing Problems
Solving Print Quality Problems
Where to Get Help
Product Status Messages
You can often diagnose problems with your product by checking the messages or icons on its LCD
screen.
Error Messages
LCD screen message
Prepare empty waste ink The waste ink bottle is almost full. Make sure you have a replacement waste
bottle.
Chip Unit Error
Chip unit not
recognized. Reattach or Condensation may have formed inside the ink tank. Make sure the ink is at
replace.
Chip Unit Error
Chip unit not
recognized. Refill after
matching ink pack with
label?
Check Ink Levels
Solution
ink bottle handy.
Remove and reinstall the chip unit. If the error recurs, replace the chip unit
with a new one.
room temperature for at least four hours.
Use only chip units from genuine Epson ink packs specified for this product.
The chip unit is nearing the end of its service life. Make sure you have a
replacement ink pack in the correct color handy.
Check the remaining ink in the ink tank using the scale on the ink pack and, if
necessary, refill the ink.
84