Epson SureColor F6200 User Manual page 42

Setting
Nozzle Check
Head Cleaning
All Nozzles
Selected Nozzles
Head Alignment
Cutter Maintenance
Head Maintenance
Waste Ink Counter
Parent topic: Using the Control Panel Menus
Related tasks
Checking for Clogged Print Head Nozzles
Cleaning the Print Head
Aligning the Print Head
Replacing the Cutter
Options
—
Execute (Light)
Execute (Medium)
Execute (Heavy)
Manual(Uni-D)
Manual(Bi-D)
Adjust Cut Position
Replace Cutter
Move Head
—
42
Description
Prints a nozzle check pattern that you
can visually inspect and then run head
cleaning if necessary.
Lets you clean all or selected nozzles,
based on the nozzle check pattern.
Select the lightest cleaning level first. If
nozzles are still clogged, select a
heavier cleaning.
Select when print results are grainy or
out of focus:
Manual(Uni-D): when printing in one
direction.
Manual(Bi-D): when printing in both
directions. If head alignment with this
setting does not correct the problem,
select Manual(Uni-D).
Adjusts the cutter position in
increments of 0.039 inch (1 mm), from
–0.12 to 0.12 inch (–3 to 3 mm).
Replace Cutter: positions the cutter for
replacement.
Positions the print head for cleaning
using the head maintenance kit.
Lets you reset the waste ink counter if
you replace the waste ink bottle before
being prompted by a message on the
control panel.