Know Your Cooker - Belling Touchtronic XOU174 Installation And User Instructions Manual

Know Your Cooker
Control Panel
Progranma Function lndimtors (4)
OlEn Set T anpadure lndimtor (1 0)
Progranma Time Dispay (1)
OlEn PrEhEat lndimtor (9)
OlEn Function lndimtor (6)
OlEn Activelndmtor
(ll)
Function Sea:t Pc:d (5)
TanpadureAdjustment Peds
(7)
Stat
I
Stop Pc:d (3)
Progranma Edt Peds (2)
Olild Led< lndcdor (12)
Progranma Function Sea:t Pc:d (8)
Programmer
To Set The Time Of Day
10
· After connecting the cooker to the mains supply the programmer time display (1) will
show 12:00 and the
0
symbol while flashing simultaneously. Please note that only a small
amount of finger pressure is necessary to activate the pads.
Using the programmer edit pads (2), adjust the displayed time to that required.
To confirm the time is correct, touch the START/STOP pad (3). Alternatively, the timer display
will stop flashing after 5 seconds, and the
0
symbol will go out.
If the timer requires resetting at any time, touch the programmer function select pad (8)
repeatedly, until the
0
symbol and the time display flash, and repeat the procedure outlined
above.
The oven controller features a short back-up power supply, so in the event of a power cut
lasting less than 1 minute, the timer will not require resetting.
Installation & User's instructions