Isuzu 2008 i290 Owner's Manual page 57

2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor, if equipped.
Refer to the child restraint instructions and
the following steps:
2.1. Find the top tether anchor.
2.2. Pull the seatback forward to access the
top tether anchor. See Seatback Latches
on page 1-8.
2.3. Pull on the finger access tab to remove
the cover to access the top tether anchor.
2.4. Route the top tether according to your
child restraint instructions and the following
instructions:
2008 - Isuzu 290/370 Owner Manual
If the position you are
using has a fixed headrest
or head restraint and
you are using a single
tether, route the tether
over the headrest or
head restraint.
2.5. Attach and tighten the top tether according
to your child restraint instructions.
3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has an adjustable
headrest or head restraint
and you are using a
single tether, raise the
headrest or head restraint
and route the tether
under the headrest or
head restraint and
in between the headrest
or head restraint posts.
If the position you are
using has a fixed or
adjustable headrest or
head restraint and you
are using a dual tether,
route the tether around
the headrest or head
restraint.
1-53