Renault Megane Manual page 84

EXTERIOR LIGHTING AND SIGNALS
1
Switching on the main
beam headlights
With the dipped beam headlights
on, move the stalk towards you.
When the main beam headlights are
lit up, an indicator light comes on
on the instrument panel.
To return to the dipped headlight
position, pull the stalk towards you.
(continued)
See-me-home lighting function
This function (useful, for example,
when opening a gate, a garage, etc.),
enables you to momentarily turn on
dipped beam headlights.
With the engine switched off and
the lights off, and the end of stalk 1
in position 0, pull stalk 1 towards
you: the dipped beam headlights
will be lit for approximately thirty
seconds.
This action may be carried out no
more than four times
maximum lighting period of two
minutes.
To switch off the lighting before it is
switched off automatically, turn the
end of the stalk 1 then return it to
position 0.
Turning off the lights
Manual operation
There are
(depending on vehicle):
- return stalk 1 to its original
position;
- the lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked. In this case, the next time
the engine is started the lights will
be switched back according to the
position of the stalk 1.
for a
Automatic operation (depending
on vehicle)
The lights go out when the engine is
stopped, when the driver's door is
opened or when the vehicle is
locked.
Lights on warning buzzer
If the lights are switched on after the
engine is switched off, a warning
buzzer sounds when the driver's
door is opened to warn you that the
lights are still on.
two possible ways
1.77