Exterior Lighting And Signals - Renault Megane Manual

EXTERIOR LIGHTING AND SIGNALS

1
2
Switching on the side
lights
Turn the end of stalk 1 until the
symbol is facing mark 4.
The instrument panel will light up
and the brightness may be adjusted
by turning tumblewheel 2.
Before driving at night, check that the electrical equipment is operating correctly and adjust the headlight
beams (if your vehicle is not carrying its normal load). In general, check that the lights are not obscured (by
dirt, mud, snow or objects which could cover them).
1.76
1
3
4
Switching on the dipped
beam headlights
Manual operation
Turn the end of stalk 1 until the
symbol is facing mark 4.
In all cases, an indicator light on the
instrument panel comes.
Automatic operation (depending
on vehicle)
With the engine running, the
dipped beam headlights switch
themselves on or off automatically
depending on exterior brightness,
without the need to operate stalk 1
(position 0).
This function can be deactivated or
reactivated.
- To activate it, press button 3 for at
least four seconds. Two beeps and
a message on the instrument panel
confirm this action.
- To deactivate it, with the engine
switched off, press button 3 for at
least four seconds.
confirms this action and the
message "Automatic
OFF" appears on the instrument
panel.
If stalk 1 is operated, it overrides
and cancels automatic operation
temporarily.
A beep
lighting