Rear Bench Seat - Renault Megane Manual

REAR BENCH SEAT

A
The seat and the seatback may be
folded away to allow bulky objects
to be carried.
To fold away the seat
Tilt seatbase A against the front
seats.
To fold down the seatback
After folding the seat base down,
lower the rear headrests, refer to the
section on the rear headrest, then
pull handle 1 and fold down the
seatback(s) B.
3.30
B
Transporting objects
If you have to place objects on the
folded seatback, it is vital that you
remove the headrests before folding
the seatback so that it can be folded
as flat
information on transporting objects
in the luggage compartment in
Section 3.
1
as possible. See the
Note: before moving the small
section of the seatback (depending
on vehicle), make sure to clip the
central seat belt tongue into the
corresponding buckle
folding down the seat squab, then
the seatback.
- When repositioning
the seatback, check
that it is correctly
locked.
- If seat covers are fitted, make
sure these do not prevent the
seatback latch from locking in.
- Ensure that the belts and
buckles are in their correct
positions.
- Reposition the headrests.
before