Introduction For Icons On Display Screen; Introduction For Buttons On Remote Controller - Gree GWH12UB-K3DNA4F Service Manual

Introduction for Icons on Display Screen

Introduction for Buttons on Remote Controller

Note:
● After putting through the power, the air conditioner will give out a sound. Operation indictor "
can operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon "
and the air conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.
1. ON/OFF Button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator "
display is ON (green indicator. The colour is different for different models), and indoor unit will give out a sound.
2. +/- button
Press "+" or " - " button once increase or decrease set temperature 0.5 °C. Holding "+" or " - " button, 2s later, set temperature on remote
controller will change quickly.On releasing button after setting is finished, temperature indicator on indoor unit will change accordingly.
(Temperature can't be adjusted under auto mode)
When setting TIMER , press "+" or " - " button to adjust time.
3. Cool button
Press this button, unit will operate in cool mode.
4. Heat button
Press this button, unit will operate in heat mode.
5. FAN button
Pressing this button can set fan speed circularly as: low( ), low medium(
super( ),auto(AUTO),quiet(
Note:
● Turbo function is not available under dry and auto mode.
● Automatically operate slient speed when starting sleep fuction.
● The unit operates at low speed under dry and auto dry mode. The speed can't be adjusted.
● Under AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.
6. I FEEL button
Press this button to start I FEEL function and "
controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature
according to the detected temperature. Press this button again to close I FEEL function and "
● Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature or
low temperature in order to avoid detecting inaccurate ambient temperature.
22
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Set time
HOUR ON OFF
Turbo fan speed
X-FAN function
Auto quiet mode
Temp. display type
:Set temp.
:Outdoor ambient temp.
).
Auto
" will be displayed on the remote controller. After this function is set, the remote
Set fan speed
battery power
humidity functions
WIFI
INTELLIGENT Temp.display type
Healthy mode
Set temperature
Up & down swing
Left & right swing
child lock
I feel function
Replacing air
Quiet mode
Sleep mode
:Indoor ambient temp.
" on the display of remote controller will blink once
),medium(
Send signal
8 heating function
" is ON (red indicator). After that, you
), medium high( ),high(
" will disappear.
Technical Information
Service Manual
"on indoor unit's
),