Dispensing A Drink - Nescafe Solution 6/30 Operation Manual

DISPENSING A DRINK

THIS MACHINE SHOULD ONLY BE USED WITH POTABLE WATER
OR BOTTLED WATER TO ENSURE CONSISTENCY AND BEVERAGE
QUALITY.
1.
Place a cup exactly in the
centre of the grid, or on the
espresso cup stand for espresso.
2. Select a drink by pushing a
selection button.
3.
The desired selection button
will remain ON and all other
buttons will switch OFF.
WARNING:
Never remove the cup or place your hands in the dispensing area during preparation!
NOtE: For advice on best practices for water safety/quality and hardness, please refer to
the NEStLÉ PROFESSIONAL Water Management tool.
If selection button 6 is defined as a "pre-selection" button then 10 beverage choices will
be available rather than 6.
4.
The dispensing area will be
illuminated by a flashing light.
When dispensing has finished
all selection buttons will light up
and the dispense area light will
remain ON.
5.
When all selection buttons
light up and the machine beeps
once you may then remove the
cup and enjoy your drink.
4
7