Time Clock - GE 25833 Instructions Manual

Setting the Voice Prompt Language
The default voice prompt language is English.
To change the answering system's voice prompt language,
• Press the LANGUAGE button on back of base to change to the FRENCH voice prompt.
The unit announces "OPTION FRANCAISE " and "Fr " shows in the message counter.
• Press the LANGUAGE button again to change to the SPANISH voice prompt. The unit
announces "SELECCION ESPANOL" and "SP " shows in the message counter.
NOTE: To change to "English", press the LANGUAGE button again.
NOTE: In remote access mode, the system follows the selected language. The voice
prompt language cannot be switched remotely.
Answering System Setup
This section shows you how to set up your answering system to receive incoming calls.
Before you begin the set up process, you must turn on the answering system.
• Press the ANSWER ON/OFF button to turn the answering system on and off.The
MESSAGES indicator lights when the answering system is on.The indicator blinks
when you have messages.
NOTE: The answering system displays "- -" when it is off.
Voice Time/Day Stamp and Real Time Clock
1. Make sure the answering system is ON.
2. Press and hold the DAY/CHECK button to set the day of the week.
3. Press and hold the HOUR button to set the hour (a.m. or p.m.). Example: 12AM, 1AM,
or 12PM, 1PM.
4. Press and release the MIN button to advance the clock in one minute intervals. Press
and hold to increase by 5-minute increments.
5. After the time is set, the real time clock will be displayed on the handset within 1
minute.
NOTE: You must set the day manually. You may choose to set the time manually as
well though the time is automatically transmitted by your local phone company as
part of Caller ID service. If you subscribe to Caller ID service, the current time is set
automatically when you receive your first CID record.
Speaker Volume
Use the VOL (or) buttons to adjust speaker volume on the base to a comfortable level. L1
is the minimum speaker volume and L8 is the maximum.
14