Changing The Battery; Memory Full - GE 25833 Instructions Manual

Accessing the Answering System from Another
Location
You can access your answering system from any touch-tone phone by entering your
3-digit security code during the playing of outgoing announcement or after you hear the
outgoing announcement.
1. Dial the telephone number to which the answering system is connected.
2. Enter the security code during the outgoing announcement or after you hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
The remote feature lets you perform the following functions:
To
Review message
Play back messages
Select mailbox
Stop message playback
Erase message
Skip message
Turn off/on answerer
Review voice menu options

Memory Full

When answering system memory is full, the system answers after 10 rings, beeps and
waits for you to enter the 3-digit security code. If you don't enter the security code within
8 seconds, the phone hangs up.
You should erase some messages so the answering system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access the
answering system, enter your 3-digit security code after you hear the beep.

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only the battery
5-2660 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk mode) before you replace battery.
2. Remove the battery compartment cover.
Press this button
1
2
1 or 2 or 3
2
0 (during message playback)
3
4
7
41