BT10 / BT20
to return to the previous channels.
·Press
·Press and hold (about 2 seconds)
scanned, it will store channels automatically.
to skip to the next channels.
·Press
·Press and hold (about 2 seconds)
scanned, it will store channels automatically.
AUX
to switch source to AUX. You can input the stereo audio
·Press
signal from extra devices such as mobile phone, tablet, computer, MP3
player to the AUX of this player.
·When the player connect the AUX input terminal,
only control by the extra devices.
NFC
If your device is NFC enabled, hold it near this player (less 4cm is best);
then the device will inform you to connect his player.
to scan previous frequencies. After
to scan next frequencies. After
10
and
buttons are