Blaupunkt BT10 Owner's Manual page 10

BT10 / BT20
CHARGING
The unit has built in lithium battery inside. Please use the DC/AC
·
adaptor or USB terminal to charge battery no matter the unit power on or
off. Suggest power off the speaker for battery charging.
In low battery status, the speaker will adjust volume automatically. The
·
unit will switch off automatically if no charged in low battery status.
During charging mode, the battery symbol will flickering; and will be
·
stabled if the charging is full.
Notes:
The battery lifetime will last longer if you follow up below simple
guidelines for charging and storing.
a. For charging first time, charge it at least 10 hours. And the battery will
provide the best performance after fully charge and discharge 3 times. It is
better to charge the unit after discharge completely, otherwise there may
impact the battery's lifetime.
b. Recharge and store the unit within the temperature range of 5°C~35°C
(40°F~95°F).
c. Do not charge (longer than 24 hours). Excessive charging or discharging
may shorten the battery's life.
d. During charging, you can play the music at the same time.
e. Please don't use it under the high humidity and temperature
environment for long time.
f. Please turn off the speaker if long time not to use.
g. Please use the supplied adaptor and cable for charging.
Important:
Due to prolong charging and discharging, the unit battery life will be
affected and playback will also be shorten. We cannot guarantee the same
playback consistently throughout and this is not include in our warranty
and service.
BLUETOOTH
·Press the power
your Bluetooth device to search the Bluetooth signal of unit. Select
"BLAUPUNKT BT10 / BT20" in searched ready Bluetooth manual list of your
device.
·The Bluetooth indicate will keep flickering before connected, and will
freeze up after connected successfully. Then you can select music and
synchronize play songs on your Bluetooth device.
button to switch into Bluetooth mode, then using
8