Flywheel Removal; Stator Removal - CPI SuperMoto Series Service Manual

ELECTRICAL SYSTEM ES-9

FLYWHEEL REMOVAL

Block the flywheel magneto rotor and loosen
the locknut with a 15mm – spanner.
Remove the rotor with a properly dimensioned
puller. Screw the puller in the threaded seat of
the rotor.
Keep the spanner in place and loosen the nut with
a 17 mm spanner.

STATOR REMOVAL

Prior to removing the stator, the seats on the
crankcase and on the stator plate have to be
provided with two reference marks in order to
ensure that the stator can be properly reinstalled.
Loosen the fastening screws and remove the
stator plate. After that remove the key.