Overlay Models - Jenn-Air JS48PPDBDA Design Manual

I N S TA L L AT I O N G U I D E – F R A M E D M O D E L PA N E L S
B. Decorator Panel Specifications for Framed Models
Decorator panels for framed models cover the door trim for an
attractive, seamless look that flows into the overall design of the
room. Framed models include full-length extruded handles (unlike
overlay models). Attention must be paid to hand clearance, or
the depth of space
between the decorator
panel and the built-in han-
dle. (See fig. 12 and fig.
13 on page 20 for more
information.)
This application is often
accomplished by using
three panels: the decorative
front panel, a spacer panel
of .10-inch thickness, and a
1/4-inch backer panel.
Other options to achieve
this look, such as using one
panel routed for different
dimensions, may be avail-
able from your cabinet
manufacturer.
Jenn-Air offers 42" and
48" dispenser and non-
dispenser models with
the framed design.
Spacer Panel
FIG. 8
Figure 8 shows a cross section view of the three panel
assembly indicating the placement of the door/grille trim.
Important: Because of continuing product improvements, Jenn-Air reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions packed with product before selecting cabinetry, making cutouts or beginning installation.
14
(B)
Dispenser
Freezer
Panel
H
W1
W2
W
Front Decorator Panel
Backer Panel
W
(C)
Non-Dispenser
Freezer Panel
H2
H1
Refer to page 20 for toe kickplate panel information.
If installing side panels, refer to page 19.
3/4" Max.
3/4" Max.
.10 "
.10 "
1/4"
1/4"
FIG. 9
Figure 9 gives a rear view of the three panel assembly and
important dimensions that are standard for framed and overlay
models. For routed panel applications, the backer panel dimen-
sion should not exceed
(A)
H
Grille Panel
W
W
(D)
H Refrigerator
Panel
Front Decorator Panel
Spacer Panel
Backer Panel
⁄ -inch thickness.
7
3 2