Side Panels - Jenn-Air JS48PPDBDA Design Manual

I N S TA L L AT I O N G U I D E – S I D E PA N E L S
Installing Side Panels
If using side panels with the Jenn-Air
they will need to be ⁄ -inch thick. Slide the panel into
1
4
position and secure with screws indicated by the shaded
area (FIG. 11a). A ⁄ -inch spacer is required between
3
1 6
the cabinet and side panel (FIG. 11b). A
10 ⁄ - inch tall spacer is required if the side panel extends
1
4
up into the machine compartment area on the refrigerator
side (FIG. 11c).
FIG. 11a
® Built-In Refrigerator,
⁄ -inch thick by
1
2
1/4" side panel fitted up to
the cabinet trim (top view)
on Freezer side.
Backside of Unit
#8-32 1/2"
Screw
3/16"/.48
Spacers
1/4"/.64 Side Panel
Freezer Side of Unit
Door
FIG. 11b
Front
82 13/16"
Side Panel
210.3
(Dimensions Typ.)
1 3/8"/3.5
3/8"/.95
2 1/2"/6.35
2 7/16"/6.19
Toe Kick and Hinge Area
1/4" side panel fitted up to
the cabinet trim (top view)
on Refrigerator side.
Backside of Unit
#8-32 1/2"
Screw
1/2"/ 1.27 Spacers
on side of machine
compartment
(3/16"/.48 below the
machine compartment)
1/4"/.64 Side Panel
Refrigerator Side of Unit
Door
FIG. 11c
Rear
24"/61
19